Results for tag : technical standards

Valve Material Chemical Compatibility Chart Material selection is the first step in choosing a valve for a chemical service. This valve material…

Asme B16 B-Norm Flange Dimensions Table (Class 150 – 900) These Asme B16 B-Norm Flange Dimensions cover Class 150, 300, 600 and…

DIN Norm Flange Dimensions Table (PN 6 – PN 150) Read this DIN Norm flange dimensions table before ordering: a valve only…

Conversion Table For Ansi Norm To Din Norm (Class 150 – 2500) DIN valves are rated by a nominal pressure in bar…

psi to kg/cm² Conversion Table US and UK equipment is rated in psi — written lbs/sq.in on the tables below — while…

Saturated Steam Table (0.10 – 51 bar absolute) Sizing a steam line, a control valve or a trap starts from the saturated…

Steam Saturation Temperature Table (1 – 80 at) In saturated steam, pressure and temperature are not independent — fixing one fixes the…

Steam Pipe Capacity Table (DN 15 – DN 300) This steam pipe capacity table gives the throughput in kg/h that each nominal…

Free Air Volume Under Pressure at 4, 5 and 7 bar Free air volume under pressure is the volume that a given…

Compressed Air Pipe Capacity Table (DN 15 – DN 200) Compressed air pipe capacity is set by the pipe cross-section and by…

Recommended Pipe Flow Velocity by Fluid The recommended pipe flow velocity depends on the fluid, on the working pressure and on whether…